Jewellery Display Holder 64 x 89 mm Earring Artwork Guide

This guide covers 64 x 89 mm earring holder artwork where the additional height helps with branding and longer jewellery drop space.

What to check for Jewellery Display Holder 64 x 89 mm Earring Artwork Guide

A tall earring holder gives useful separation between the brand and the product, but the holes still define the working layout.

Design the upper, middle and lower areas deliberately so the earrings do not cover product information or make the card feel unbalanced.

Key checks before you export

• Use the 64 x 89 mm cutter for this tall display card and keep it separate from printable artwork.
• Use the taller holder to place the logo above the earring holes and leave a clean fall area below for longer drops.
• Use the extra height to separate branding, product information and fixing details without crowding the cut areas.
• Keep the area beneath the holes visually quiet so earrings remain easy to inspect on the finished card.
• Export the PDF and review the earring drop area on the full-height proof before approval.

Common artwork mistakes to avoid

• Adding small feature text below the holes can fail once longer earrings hang over it.
• The extra height is helpful, but it does not remove the need to keep the hole area and product drop clear.
• Using another holder template because it looks close enough to the required size.

Practical setup notes

Use the 64 x 89 mm earring cutter and check paired hole positions before deciding where text and logos sit.

Keep the lower hanging area clear, avoid borders that highlight small tolerance shifts, and proof the file at real size.

Pre-upload checks

1. Confirm the 64 x 89 mm earring holder size.
2. Check paired hole placement and lower drop clearance.
3. Preview the card with longer earrings in position.
4. Make sure cutter guidance is supplied as checking information, not printed decoration.

Questions this guide answers

Why choose the 64 x 89 mm earring guide?

This format suits earrings that need more vertical drop space, so the hole positions and lower safe area should be checked carefully.

Where should the holes sit in relation to the logo?

The holes should sit far enough below the logo for the brand to remain visible, while still leaving room for the earrings to hang.

Related Aspect Printing pages

• Request a quote
• Artwork guide
• Product inserts