Jewellery Display Holder 64 x 64 mm Necklace Artwork Guide

This guide helps set up 64 x 64 mm necklace holder artwork where a compact card must still leave space for the chain and pendant.

What to check for Jewellery Display Holder 64 x 64 mm Necklace Artwork Guide

A square necklace holder works best when the artwork frames the product rather than filling every available area.

Because the pendant may sit close to the centre, avoid busy artwork where the jewellery needs to be seen clearly.

Key checks before you export

• Use the 64 x 64 mm cutter for this compact square card and keep it separate from printable artwork.
• Place the chain support carefully because the square card leaves a shorter drop area for the necklace.
• Plan a simple centred layout because the square format leaves less room for long product descriptions.
• Keep the pendant area quiet and use the outer corners for subtle brand colour or pattern.
• Export the PDF and check the chain route and pendant area on a square preview before approval.

Common artwork mistakes to avoid

• A central badge or roundel can clash with the pendant and make the mounted product feel busy.
• A necklace can visually dominate this compact holder, so avoid artwork that competes with the chain line.
• Using another holder template because it looks close enough to the required size.

Practical setup notes

Build from the 64 x 64 mm necklace holder cutter and keep the chain support information visible in the checking proof.

Place branding where it will not fight the pendant, then use bleed and safe margins to keep the trimmed edge clean.

Pre-upload checks

1. Confirm the artwork is built on the 64 x 64 mm necklace holder cutter.
2. Check the chain support and pendant area as one layout.
3. View the PDF at actual size to judge small copy.
4. Ensure cutter guidance is provided for checking without becoming printed content.

Questions this guide answers

Why does the 64 x 64 mm necklace holder need extra care?

The short drop area gives less margin for chain and pendant placement, so the exact cutter position matters.

How do you design a compact necklace holder?

Start with the chain support and pendant position, then keep the remaining artwork simple enough to frame the jewellery.

Related Aspect Printing pages

• Request a quote
• Artwork guide
• Product inserts