Jewellery Display Holder 64 x 64 mm Bow Artwork Guide

This guide covers 64 x 64 mm bow holder artwork, where a compact square layout must leave enough room for the accessory and the brand.

What to check for Jewellery Display Holder 64 x 64 mm Bow Artwork Guide

A 64 x 64 mm bow holder is a small retail card, so the safest design is simple, direct and easy to recognise at actual size.

The bow will take up much of the visual space. Build around that fact rather than adding copy that will be hidden or difficult to read.

Key checks before you export

• Use the 64 x 64 mm cutter for this compact square card and keep it separate from printable artwork.
• Keep the bow fixing compact and make the brand mark short, because the square card has limited height once the accessory is attached.
• Plan a simple centred layout because the square format leaves less room for long product descriptions.
• Use simple blocks of colour or a restrained pattern so the bow can stand out on a small square face.
• Export a PDF and view it at 64 x 64 mm so small text and bow placement can be judged realistically.

Common artwork mistakes to avoid

• Trying to fit a full portrait-style layout into the square holder can leave no breathing room around the bow.
• The compact shape makes small type and detailed borders more vulnerable to trim and fixing tolerance.
• Using another holder template because it looks close enough to the required size.

Practical setup notes

Use the square cutter guide from the start and avoid adapting artwork made for taller jewellery cards.

Keep background treatments bold but controlled, then check that the bow fixing area remains clear on the proof.

Pre-upload checks

1. Confirm the document is the 64 x 64 mm square holder.
2. Check that the bow fixing does not interrupt the logo.
3. Review all type at actual printed size.
4. Make sure the exported PDF includes clear cutter guidance without printing it as artwork.

Questions this guide answers

Why is the 64 x 64 mm bow guide separate?

The square format behaves differently from portrait holders, so the bow fixing area and visible brand space need a tighter layout.

What works best on a square bow holder?

Short branding, clear colour and minimal supporting text usually work best because the bow becomes the dominant element.

Related Aspect Printing pages

• Request a quote
• Artwork guide
• Product inserts