Jewellery Display Holder 55 x 85 mm Earring Artwork Guide

This guide helps prepare 55 x 85 mm earring holder artwork with enough clearance for paired holes, hanging jewellery and visible retail branding.

What to check for Jewellery Display Holder 55 x 85 mm Earring Artwork Guide

A portrait earring card needs a simple reading order: logo first, product displayed clearly, then any supporting information below.

The holes are functional, so do not design around them as if they are decorative dots. Give the surrounding space enough tolerance for production and use.

Key checks before you export

• Use the 55 x 85 mm cutter for this portrait retail card and keep it separate from printable artwork.
• Use the portrait height to separate the brand header from the earring holes, leaving space for drops or hooks to hang naturally.
• Use the taller format for a clear header area, with product and price details kept away from the lower fixing zone.
• Keep small copy away from the hanging area because earrings can swing or sit forward once fitted to the card.
• Export the artwork and inspect the PDF with the earring holes and likely drop length visible in the proof.

Common artwork mistakes to avoid

• Decorative borders around paired holes can make slight punching tolerance look more obvious.
• The tall card can encourage too much copy, which makes the product area feel cramped.
• Using another holder template because it looks close enough to the required size.

Practical setup notes

Start from the 55 x 85 mm earring holder cutter and confirm the paired hole positions before committing to the page layout.

Keep the upper brand area clean, avoid tight borders around the holes, and check the lower copy with the expected earring shape in mind.

Pre-upload checks

1. Confirm the file uses the 55 x 85 mm earring holder cutter.
2. Check paired holes, bleed and safe zones separately.
3. Review the proof with a typical earring drop length in mind.
4. Make sure cutter or drill references cannot be mistaken for printed artwork.

Questions this guide answers

What is different about the 55 x 85 mm earring format?

The extra height helps with retail presentation, but the earring holes and hanging space still need a generous safe area.

Where should copy sit on a 55 x 85 mm earring card?

Place essential branding above the holes and keep any care, price or material details low enough that earrings do not hide them.

Related Aspect Printing pages

• Request a quote
• Artwork guide
• Product inserts