Jewellery Display Holder 55 x 85 mm Necklace Artwork Guide

Use this guide when preparing 55 x 85 mm necklace holder artwork where the chain path and pendant position need to stay clear.

What to check for Jewellery Display Holder 55 x 85 mm Necklace Artwork Guide

The portrait necklace holder gives useful space for brand presentation, but the product sits across the design rather than beside it.

Plan the card around the support notch or fixing detail first, then place visual detail where it will still be seen once the necklace is mounted.

Key checks before you export

• Use the 55 x 85 mm cutter for this portrait retail card and keep it separate from printable artwork.
• Reserve the upper area for the chain support and keep the pendant path free from essential wording.
• Use the taller format for a clear header area, with product and price details kept away from the lower fixing zone.
• Use the longer portrait face for brand storytelling, but leave a quiet central drop zone where the necklace will sit.
• Export the PDF and check the design with a chain and pendant placement sketched over the proof.

Common artwork mistakes to avoid

• A detailed lower background can make a small pendant harder to see on the finished card.
• Vertical artwork can look balanced before the necklace is fitted, then feel crowded once the chain and pendant are in place.
• Using another holder template because it looks close enough to the required size.

Practical setup notes

Create the file from the 55 x 85 mm necklace holder guide and keep the chain support detail visible in the proof stage.

Use stronger artwork at the top or outer areas, leaving the central pendant path calmer and easier to read.

Pre-upload checks

1. Confirm the artwork matches the 55 x 85 mm necklace holder.
2. Check the support notch or fixing area before exporting.
3. Preview how a chain and pendant will cover the card.
4. Open the exported PDF and verify bleed, safe margin and cutter instructions.

Questions this guide answers

Why does the 55 x 85 mm necklace card need its own setup?

The portrait shape gives a different chain drop and visible product area from square or taller variants, so the cutter should not be swapped.

How should the necklace area be allowed for?

Leave a clear drop path from the support point and keep the strongest artwork away from the likely pendant position.

Related Aspect Printing pages

• Request a quote
• Artwork guide
• Product inserts